Nationally Recognised Training

Working at Heights

RIIWHS204D Work Safely at Heights

Course Delivery

FACE TO FACE - at our site in Wetherill Park (see our course calendar for scheduled Work Safely at Height dates)

FACE TO FACE - at your site (providing you have adequate training areas, resources and participants)

 

Course Duration

1 day (approx. 7 hours)

 

PUBLIC Course Cost

$250 (gst-free) per person - see our training calendar for available course dates

 

PRIVATE Course Cost

$1,850 (gst-free) this daily rate applies for a private group booking of up to 8 participants for courses delivered at your site or ours - contact us to discuss available dates. Additional travel fees may apply for locations outside Sydney Metro area.

 

Course Prerequisites

Participants must be able to speak and understand English and provide suitable identification.

 

Course Overview

Working at Heights training course is suitable for any person who is required to work at any height. The course covers all aspects of safe access to heights, legislative requirements, selection use and maintenance of personal protective equipment (including correct use and fitting of safety harnesses), along with practical exercises of setting up fall arrest systems and the rescue of a suspended casualty.

Height safety training includes an overview of legislation relating to working at heights, introduction to hazards and risks, correct use of harness and recovery procedure for fall arrest.

 

Course Content

Theory component includes:

  • Work at Height Regulations / PPE regulations
  • Health and Safety at Work Act
  • AS/NZ and EN Standards
  • Hazard Analysis and Risk Assessment
  • Work restraint and positioning
  • Fall Arrest
  • Inspection and record keeping procedures

Practical component includes:

  • Identification and inspection of equipment using samples
  • The correct fitting of harnesses
  • The correct use of ladders, lanyards, anchor straps
  • The Gotcha Rescue System
  • The correct and safe storage of equipment

 

Course Outcomes

By the end of this working at heights training course, participants will be able to: identify work requirements, identify work procedures and instructions for the task, access and install equipment, perform work at heights, clean up work area and rescue suspended persons. Satisfactory completion of this course will result in the awarding of a Statement of Attainment in the Nationally Recognised Unit of Competency RIIWHS204D Work Safely at Heights.

 

OTHER IMPORTANT INFORMATION:

This course is only conducted in English, no interpreters or translators are permitted.

FOR COURSES CONDUCTED AT OUR SITE IN WETHERILL PARK, NSW:

YOU MUST WEAR/BRING THE FOLLOWING ITEMS TO THIS COURSE:
      * HI VIS WORKWEAR OR SAFETY VEST                        
      * STEEL CAP FOOTWEAR 
      * HARD HAT                            

(Entry to premises will not be allowed if you fail to bring/wear the items above).

For hygiene purposes, we also recommend you bring your own safety harness, however, if you do not have one, we do have some loan items for the course duration (depending on how many participants need this item).

We provide filtered water, tea, coffee & biscuits during the course, however lunch is NOT included so you will need to BRING or BUY your own lunch from nearby shops. 

Should you have any other questions regarding course requirements, please contact us via phone 1300 26 27 21 or email: admin@cobra1.com.au 

IMPORTANT NOTE:  You must arrive on time as per the above course start times.  Being late not only impacts you but the other participants in this course.  If you arrive 30 minutes or more late you may not be allowed to continue and no refund will be issued for any monies paid.

Enrol Now

Classes for RIIWHS204D Work safely at heights starting 11 Oct 2019