Nationally Recognised Training

Basic Rigging - RB

CPCCLRG3001A Licence to perform rigging basic level [RB]

Participants must have a valid and current Dogging High Risk Work (HRW) Licence (Class DG) prior to attending this course.

Course Delivery

FACE TO FACE - at our site in Wetherill Park (see our course calendar for scheduled dates)
FACE TO FACE - at your site (providing you have adequate training areas, resources and participants

Course Duration

5 days [4 days training plus 1 day assessing] (35 hours)

Course Cost

$1,650 per person (GST free)

[A SafeWork NSW licence fee is additional and payable by each applicant at Australia Post Office]

Course Prerequisites

*  You MUST hold a valid Dogging/Dogman HRW licence class DG prior to attaining your Basic Rigging class RB licence.

*  Participants must be over 18 years of age;

*  Must have GOOD English skills (be able to read, write, speak and understand technical concepts in English);

*  Be able to understand mathematical equations; and

*  Provide 100 points of Identification as per SafeWork NSW requirements. If a participant fails to bring 100 points of identification a re-booking fee of $100 will be charged for assessment to be re-scheduled.

Course Overview

This basic riggers course is a legal requirement for persons required to perform basic rigging work associated with movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of precast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes.

Basic Rigging has a pre-requisite requirement. This requirement may be met by either the successful completion of the unit CPCCLDG3001A Licence to perform dogging or holding a current valid HRW licence for dogging (class DG).

During this course, operators are trained and assessed against the National Standard for Licensing Persons Performing High Risk work including: being able to plan the work, select and inspect equipment, set up task, erect structures and plant, and dismantle structures and plant.

Both theory and practical training is provided over a 4 day period [depending on the current skills and knowledge of the operator(s)], with the SafeWork licence assessments conducted on the 5th day.

Course Content

  • Compliance with WHS licensing legislation and Codes of Practice
  • Communicate and work safely with others in the work area
  • Risk assessment and management procedures for different tasks associated with the work
  • Selection and inspection of equipment and materials
  • Erection and dismantling of structures and plant at basic level
  • Operation of Scissor Lifts

Course Outcomes

On successful completion of training and assessment, participants will receive a Statement of Attainment – CPCCLRG3001A Licence to Perform Rigging Basic Level and be eligible to apply for a National Licence to Perform High Risk Work (Class RB).

This unit completes the prerequisite for progressing to CPCCLRG3001A Licence to perform rigging - intermediate level.

HRW Licences are valid for 5 years from the date of issue. To apply for your HRW licence, you must lodge your HRW assessment paperwork and application form at an Australia Post outlet together with a passport sized photo and pay the prescribed  processing fee within 60 days of completion of your final HRW assessment. Failure to lodge your paperwork on time will result in you being an unlicensed operator and further training and/or assessing fees will apply after the 60-day period.


Other Important Information:

This course is only conducted in English, no interpreters or translators are permitted.


      * HI VIS WORKWEAR OR SAFETY VEST                        
      * HARD HAT                            

(Entry to premises will not be allowed if you fail to bring/wear the items above).

We provide filtered water, tea, coffee & biscuits during the course, however lunch is NOT included so you will need to BRING or BUY your own lunch from nearby shops. 

Should you have any other questions regarding course requirements, please contact us via phone 1300 26 27 21 or email: 

IMPORTANT NOTE: Participants must be 18 years or older at the time of the High Risk Work Licence Assessment. 100 points of  ORIGINAL ID is required as per SafeWork NSW requirements. If you do not have sufficient points/type of ID you will not be assessed. Please contact our office prior to your assessment if you have any ID concerns. If a participant fails to bring 100 points of identification a re-booking fee of $100 will be charged for assessment to be re-scheduled. You must arrive on time as per the above course start times.  Being late not only impacts you but the other participants in this course.  If you arrive 30 minutes or more late you may not be allowed to continue and no refund will be issued for any monies paid.

Enrol Now

Course Dates

Please select your course date.

Please select your state so that courses on the site can be shown for your location.

Start Date Classes Units Location Places left Cost
Mon 18th Nov 2019 at 7:30AM 5 classes 1 unit Wetherill Park 2      Price $1,650.00 Enrol
Mon 24th Feb 2020 at 7:30AM 5 classes 1 unit Wetherill Park 8      Price $1,650.00 Enrol